Home Tech Land is reader-supported. When you buy through links on our site, we may earn a commission. As an Amazon Associate, we earn from qualifying purchases.
Last updated: . How we research: We build these guides from manufacturer support documentation and owner reports, and we update them when products or standards change. Learn more about Home Tech Land.
You plug in a cable box, game console, streaming stick, or laptop, the picture comes up fine, and there is total silence. It is one of the most common home theater complaints, and the cause is usually a setting rather than broken hardware.
This guide walks through how to fix no sound on TV through HDMI (High-Definition Multimedia Interface) when the source device plays video but not audio. If your problem is a soundbar connected with HDMI audio return channel (ARC), that is a different setup, and our guide on how to connect a soundbar to a TV covers it.
Quick Answer: Check that neither the TV nor the source is muted, and that the TV is sending sound to its own speakers rather than an external device that is turned off. Then reseat or swap the HDMI cable, power cycle both devices, and set the source’s audio output to stereo or pulse-code modulation (PCM) to rule out a format the TV can’t play. If one HDMI port stays silent while others work, the port itself may be faulty.
Quick-Fix Checklist: TV No Sound Over HDMI
Work through these steps in order. Most fixes happen in the first five.
- Check volume and mute on both devices. Raise the TV volume and confirm it isn’t muted, then check the source too.
- Set the TV’s sound output to TV speakers. Open the TV’s sound settings and make sure audio isn’t routed to a soundbar, receiver, optical output, or Bluetooth headphones that are switched off or disconnected.
- Reseat the HDMI cable. Unplug both ends of the cable, then push each one firmly back in.
- Power cycle the TV and the source. Turn both off, unplug them from the wall for about a minute, then plug them back in and turn on the TV before the source so the two devices renegotiate the connection.
- Try another HDMI port and another cable. Move the source to a different HDMI input, then swap in a cable you know works.
- Connect the source directly to the TV. Remove any HDMI switch, splitter, receiver, or capture device from the chain. If sound returns, the device in between is the problem.
- Set the source’s audio output to stereo or PCM. Surround formats such as Dolby Digital Plus or DTS can come out silent on TVs that don’t decode them. The device-specific menus are listed below.
- Turn off HDMI-CEC to test. Disable Consumer Electronics Control (CEC) on the TV for a moment to see whether it is handing audio to another device.
- Update the firmware. Install the latest software on the TV and the source device, since updates often fix HDMI handshake and audio bugs.
- Factory reset as a last step. If nothing else works, reset the source device first, then the TV. A reset erases settings and sign-ins.
Check the TV’s Sound Output Setting
Every TV has a setting that decides where audio goes: built-in speakers, an HDMI ARC device, optical, or Bluetooth. On Samsung TVs, for example, the setting lives under Settings > Sound > Sound Output. Other brands use similar names, so look for “Sound Output”, “Audio Output”, or “Speakers” and pick the TV speakers option.
Some TVs also have a digital audio out format setting for the optical or ARC output. Samsung lists it under Settings > Sound > Expert Settings > Digital Output Audio Format and recommends Auto.
Fix the Audio Format on Your Source Device
When video works but audio doesn’t, the source may be sending a surround signal the TV can’t play. Switching to stereo or PCM is the quickest test. These menu paths come from each maker’s support pages.
PlayStation 5
Sony’s support page says to make sure the PlayStation 5 (PS5) audio output is set to an HDMI device. Go to Settings > Sound > Audio Output and check Output Device. In the same menu, HDMI Device Type tells the console what is connected, and Audio Format (Priority) sets the format for games and video apps. Sony also recommends trying a different cable, ideally the HDMI 2.1 cable that came with the console, and connecting the PS5 directly to the TV. For picture settings once sound is fixed, see our guide to the best TV settings for GTA 6.
Xbox Series X and Series S
Press the Xbox button, then go to Profile & system > Settings > General > Volume & audio output. If HDMI audio is set to Bitstream out and the TV can’t decode that format, switch to Stereo uncompressed as a test. If sound returns, step back up to a surround option your TV supports.
Apple TV
Apple’s no-sound guide says to go to Settings > Video and Audio > Audio Format, turn on Change Format, and select a different format. It also suggests setting Audio Mode to 16 bit, setting Audio Output to Apple TV when you use TV speakers, and turning off volume leveling on the TV. Apple recommends an Ultra High Speed HDMI cable for HDMI 2.1 connections.
Fire TV
On many Fire TV models, Amazon’s help pages point to Settings > Display & Sounds > Audio and Video Diagnostics, where you choose the no-audio option and follow the on-screen fixes (the tool isn’t on every device). The audio format lives under Settings > Display & Sounds > Audio > Surround Sound, where Best Available is the default. If the TV stays silent, try turning off Dolby Digital Plus or choosing a stereo option. Our Fire TV Stick 4K Max review covers the stick’s audio formats in more detail.
Roku Streaming Players
Roku’s support article says to press Home and select Settings > Audio > Digital output format > Stereo if you still hear no sound, and also when sound drops out only during surround content. If you later want surround, the Custom option lets you choose Dolby Digital or DTS manually.
Cable and Satellite Boxes
Menus vary by provider, but most boxes have an audio or Dolby Digital setting in their system settings. Switch it to PCM or stereo to test, check that the box’s own volume isn’t at zero, and restart the box. If that fails, contact your provider.
Laptop Connected to a TV With No Sound
A laptop often keeps playing through its own speakers after you connect the TV, so pick the TV as the sound output.
- Windows 11: Select Start > Settings > System > Sound, then choose the TV in the Output section. You can also select the speaker icon on the taskbar and use the arrow next to the volume slider. Microsoft notes you may need to set an HDMI device as the default output.
- macOS: Choose Apple menu > System Settings, click Sound in the sidebar, click Output, and select the TV in the list.
If the TV doesn’t appear in the list, reconnect the cable and restart the laptop. Some USB-C adapters don’t carry audio, so try a different adapter if you use one.
HDMI-CEC Conflicts
HDMI-CEC lets devices control each other over the cable. Brands rename it: Samsung calls it Anynet+ (HDMI-CEC) and puts it under Settings > General > External Device Manager. CEC can hand audio control to a soundbar or receiver that is asleep. Turn CEC off on the TV, power cycle everything, and test again. If sound returns, re-enable CEC and check each device’s settings one at a time.
Symptoms, Causes, and Fixes
| Symptom | Likely Cause | Fix |
|---|---|---|
| No sound from any source | TV muted or sound output set to an external device | Unmute and set sound output to TV speakers |
| No sound from one device only | Source audio format, volume, or mute | Set the source to stereo or PCM and check its volume |
| Sound in menus but not in movies | Surround track the TV can’t decode | Switch the source or app audio to stereo |
| No sound on one HDMI port only | Faulty port or port setting | Use another port and update the TV firmware |
| Sound cuts in and out | Loose or low-quality cable | Reseat or replace with a certified cable |
| Laptop shows picture but no audio | TV not selected as output device | Select the TV in Windows or macOS sound settings |
| Sound returns only after unplugging other devices | HDMI-CEC conflict or switch in the chain | Turn off CEC and connect directly to the TV |
When the HDMI Port May Be Faulty
Suspect the port when one input stays silent with several different cables and sources while the other inputs play sound normally. Look for bent pins or a loose connector. Software fixes rarely cure physical damage, so use another port and contact the TV maker if the set is under warranty. If your TV also turns itself off at random, our guide on why an LG TV keeps turning off covers related power and CEC issues.
Common Mistakes
- Checking only the TV’s volume and forgetting the source has its own mute or volume.
- Leaving the TV’s sound output set to a soundbar or headphones that are off.
- Forcing a surround format such as Dolby Atmos or DTS on a TV with basic speakers.
- Testing through an HDMI switch or receiver instead of connecting directly to the TV.
- Jumping to a factory reset before trying a different cable and port.
Recommended Gear
Overall pick: Zeskit Maya 8K Certified Ultra High Speed HDMI Cable, because a certified cable rules out the most common hardware cause of HDMI no audio and supports current consoles and streamers.
| Gear | Why It Helps | Price Range | Link |
|---|---|---|---|
| Zeskit Maya 8K Certified Ultra High Speed HDMI Cable | Carries the official Ultra High Speed certification label and is rated at 48 gigabits per second (Gbps), with support for 4K at 120Hz and enhanced audio return channel (eARC), per the maker | Under $50 | Check price on Amazon |
| Amazon Basics High-Speed HDMI Cable (18Gbps) | A low-cost spare for cable boxes, streaming sticks, and 4K at 60Hz sources, useful for swap testing | Under $50 | Check price on Amazon |
| OREI HDA-912 HDMI Audio Extractor | Pulls audio from the HDMI signal to optical and 3.5mm outputs for older TVs or speakers, with 4K at 60Hz pass-through, per the maker | Under $50 | Check price on Amazon |
If you’re shopping for a new set with strong HDMI 2.1 support, see our guide to the best gaming TV for PS5 and Xbox.
Frequently Asked Questions
Why does my TV have a picture but no sound through HDMI?
The most common causes are a muted source, the TV sending sound to an external device, a loose cable, or an audio format the TV can’t decode. Setting the source to stereo or PCM fixes many cases.
Can a bad HDMI cable cause no audio?
Yes. Sony and Apple both list a faulty cable as a cause of sound problems and suggest trying a different one. A certified cable that matches your devices is the safest replacement.
Should I use PCM or Bitstream for TV speakers?
For built-in TV speakers, PCM or stereo is the safest choice because the source decodes the audio itself. Bitstream sends the raw surround signal, which only helps when a TV, soundbar, or receiver can decode it.
Why is there sound in menus but not in movies or games?
Menus usually play in stereo, while movies and games often use surround formats. If your TV can’t decode that format, it stays silent. Switch the source or the app’s audio track to stereo.
How do I know if my TV’s HDMI port is broken?
If one port has no sound with several cables and devices while other ports work, the port is likely faulty. Use another input and contact the TV maker if it is under warranty.
Related Guides
- How to Connect a Soundbar to a TV
- Black Friday Soundbar Deals 2026
- How to Turn Off Motion Smoothing
- Best Gaming TV for PS5 and Xbox
- How to Mount a TV on Drywall Safely
- How to Clear Cache on a Fire TV Stick
Get Our Weekly Tech Tips
Sign up for one short email each week with practical home tech setup guides, buying advice, and deal alerts.