Home Tech Land is reader-supported. When you buy through links on our site, we may earn a commission. As an Amazon Associate, we earn from qualifying purchases.
Last updated: . How we research: We build these guides from manufacturer support documentation and owner reports, and we update them when menus or apps change. Learn more about Home Tech Land.
Learning how to connect a soundbar to a TV takes about five minutes once you know which port to use. Most people should use the High-Definition Multimedia Interface (HDMI) port labeled ARC or eARC, but optical and Bluetooth work too, with tradeoffs in sound quality and convenience. This guide walks through each connection, the TV settings that make it work, and the fixes for the most common “no sound” problems.
Quick Answer: Plug an HDMI cable into the TV’s HDMI port labeled ARC or eARC and into the soundbar’s HDMI OUT (TV-ARC) port. Turn on the TV’s HDMI-CEC setting (Anynet+ on Samsung, SIMPLINK on LG), then set the TV’s sound output to the soundbar or receiver. If your TV has no ARC port, use an optical cable instead, which handles stereo and compressed 5.1 surround sound but not Dolby Atmos.
Which Connection Should You Use?
Check the back of your TV and soundbar first. Most TVs sold in the last several years have at least one HDMI port marked ARC, and many newer models mark it eARC. The table below shows what each connection can carry, based on Roku’s surround sound support guide and the HDMI Licensing Administrator’s eARC specification page.
| Connection | Best For | Audio It Carries | Main Limit |
|---|---|---|---|
| HDMI eARC | Newer TVs and Dolby Atmos soundbars | Uncompressed 5.1 and 7.1, Dolby TrueHD, Dolby Atmos, DTS:X, DTS-HD Master Audio | Both the TV and soundbar must support eARC |
| HDMI ARC | Most TVs from the last decade | Stereo, Dolby Digital 5.1, and on many TVs Dolby Digital Plus, including compressed Atmos | No lossless formats |
| Optical (TOSLINK) | Older TVs with no ARC port | 2-channel stereo pulse-code modulation (PCM) or compressed 5.1 (Dolby Digital or DTS) | No Atmos, and usually no volume control from the TV remote |
| Bluetooth | Quick wireless setups | Compressed stereo | Possible lip sync delay, and it ties up the TV’s Bluetooth |
Enhanced Audio Return Channel (eARC) arrived with the HDMI 2.1 specification, according to Sony. Roku notes that if only one of your devices supports eARC, the pair still works over regular ARC, just without the extra formats.
How to Connect a Soundbar With HDMI ARC or eARC
HDMI ARC (Audio Return Channel) lets the TV send sound back down the same HDMI cable to the soundbar. It also lets your TV remote control the soundbar’s volume through HDMI-CEC (Consumer Electronics Control).
- Find the right ports. On the TV, look for the HDMI input labeled ARC or eARC. On the soundbar, look for the HDMI port labeled OUT (TV-ARC), TV (eARC), or similar. Samsung’s support guide says to connect the TV’s HDMI IN (ARC) port to the soundbar’s HDMI OUT (TV-ARC) port.
- Use a suitable cable. For ARC, Samsung says any HDMI 1.4 or newer cable works. For eARC, Roku recommends a High Speed HDMI Cable with Ethernet or an Ultra High Speed HDMI Cable.
- Turn on HDMI-CEC on the TV. Every brand names it differently: Anynet+ on Samsung, SIMPLINK on LG, BRAVIA Sync on Sony, and CEC on Vizio and Roku TVs. Samsung notes that Anynet+ must be on to use eARC.
- Set the TV’s sound output. Switch the output from the TV speakers to the soundbar, receiver, or HDMI ARC option. The exact menu paths for major brands are below.
- Turn on eARC if your TV has a separate switch. Some TVs and soundbars have their own eARC toggle. Sony’s receiver manual, for example, tells owners to turn on eARC on the audio device and check for a similar setting on the TV.
- Set the digital audio format. If your TV has a digital audio output setting, choose Auto or Passthrough (sometimes called Bitstream) so the soundbar can decode surround formats itself.
- Test it. Play something, then raise and lower the volume with the TV remote. If the soundbar responds, CEC and ARC are working.
Samsung TV Settings
According to Samsung’s support guide, recent models list Anynet+ under Settings, All Settings, Connections, External Device Manager, Anynet+ (HDMI-CEC). On 2017 to 2023 models, the path is Settings, General, External Device Manager, Anynet+ (HDMI-CEC). To route the sound, open Settings, Sound, Sound Output, and choose Receiver (HDMI) or your soundbar’s name.
LG TV Settings
On LG webOS TVs, the sound output option sits under Settings, Sound, and Sound Out (or Sound Output), where you choose the HDMI (ARC) device. LG calls HDMI-CEC SIMPLINK, and it usually sits under the General or Connection menu in the HDMI settings. Labels shift between webOS versions, so check your TV’s built-in user guide if you can’t find them.
Roku TV Settings
Roku’s support page lists two places to check. First, go to Home, Settings, System, Control other devices (CEC), and check ARC (or eARC), System audio control, and 1-touch play. Then go to Settings, System, Audio, S/PDIF and ARC, and leave it on Auto detect or choose Auto passthrough. This applies to Roku TVs from TCL, Hisense, Sharp, Westinghouse, and Roku’s own brand.
How to Connect a Soundbar With an Optical Cable
- Remove the plastic caps. Roku points out that new optical cables often ship with small protective caps on each end. Pull them off before you plug anything in.
- Plug in both ends. Connect the TV’s Optical or Digital Audio Out port to the soundbar’s Optical or D.IN port. The plug only fits one way, so don’t force it.
- Pick the optical input on the soundbar. Press the source or input button until the soundbar shows Optical or D.IN.
- Set the TV’s sound output. Choose Optical or Digital Audio Out in the TV’s sound menu, and turn off the TV speakers.
- Set the format. Choose Auto, Bitstream, or Dolby Digital so 5.1 content reaches the soundbar as surround sound. PCM sends only stereo over optical.
Optical won’t carry volume control signals, so you may need the soundbar’s remote or a universal remote. Many soundbars can learn the TV remote’s volume buttons, which is worth checking in the manual.
How to Connect a Soundbar With Bluetooth
- Put the soundbar in Bluetooth pairing mode (usually a button marked BT, for Bluetooth, or a source button).
- On the TV, open the sound output or Bluetooth menu and search for devices.
- Select the soundbar from the list and confirm the pairing.
Bluetooth is easy, but it compresses the audio and can add a slight delay between sound and picture. If you notice lip sync problems, look for an audio delay or audio and video (AV) sync setting on the TV or soundbar, or switch to HDMI.
Troubleshooting: Soundbar Has No Sound From the TV
- Wrong HDMI port. The cable must go into the TV’s ARC or eARC port, not any HDMI input. Only one port usually supports ARC.
- CEC is off. Turn on Anynet+, SIMPLINK, BRAVIA Sync, or CEC, then turn both devices off and on again.
- Sound output is still set to TV speakers. Check the sound menu after every firmware update, since updates sometimes reset it.
- Power cycle both devices. Samsung’s soundbar troubleshooting page suggests unplugging the soundbar for 30 seconds before trying again. Unplug the TV for the same time.
- Swap the cable. A damaged or older cable can drop the audio signal, especially for eARC. Try a certified High Speed or Ultra High Speed HDMI cable.
- Disconnect other HDMI devices. Samsung suggests temporarily unplugging set-top and streaming boxes to rule out CEC conflicts.
- Update the firmware. Check for software updates on both the TV and soundbar. Samsung also lists a soundbar reset (holding the volume buttons until the display shows INIT) as a last step on its models.
- Sound only in stereo, or no Atmos. Set the TV’s digital audio output to Auto or Passthrough, and make sure the app and the content actually offer Dolby Atmos.
Recommended Gear
You usually don’t need anything beyond the cable in the soundbar box, but these help when the included cable is too short or too old for eARC.
| Gear | Why It Helps | Price Range | Link |
|---|---|---|---|
| Ultra High Speed HDMI cable | Supports eARC, plus 4K at 120 hertz (Hz) for consoles | Under $50 | Check price on Amazon |
| High Speed HDMI cable with Ethernet | Works for ARC and eARC on most setups | Under $50 | Check price on Amazon |
| Optical audio (TOSLINK) cable | For TVs without an ARC port | Under $50 | Check price on Amazon |
Still choosing a soundbar? Our Black Friday soundbar deals cover picks at every budget, and our home theater deals guide covers soundbar, subwoofer, and surround bundles. For individual models, see our Bose Smart Ultra Soundbar review, LG SP8YA review, and Samsung HW-Q990B review. If you’re setting up a new TV at the same time, our guide to turning off motion smoothing fixes the other common out-of-box annoyance.
Frequently Asked Questions
Do I need a special HDMI cable for a soundbar?
For regular ARC, Samsung says any HDMI 1.4 or newer cable works. For eARC, Roku recommends a High Speed HDMI Cable with Ethernet or an Ultra High Speed HDMI Cable. Older, unlabeled cables can cause dropouts.
Is HDMI ARC better than optical?
Yes, for most setups. ARC carries everything optical can, plus Dolby Digital Plus on many TVs, and it lets the TV remote control the soundbar’s volume. Optical tops out at compressed 5.1 surround and can’t carry Dolby Atmos.
Can I connect a soundbar to a TV without an HDMI ARC port?
Yes. Use the TV’s optical (digital audio out) port, Bluetooth, or a 3.5 millimeter headphone or audio out jack if both devices have one. You’ll lose Atmos and possibly remote volume control, but everyday TV sound works fine.
Why does my TV remote not control the soundbar volume?
HDMI-CEC is usually off or the soundbar is connected by optical. Turn on Anynet+, SIMPLINK, BRAVIA Sync, or CEC on the TV and make sure the HDMI cable runs to the ARC or eARC port. With optical, program the soundbar to learn your TV remote if it supports that.
What is the difference between ARC and eARC?
ARC sends compressed audio such as Dolby Digital 5.1 from the TV to the soundbar. eARC has far more bandwidth, so it can carry uncompressed 5.1 and 7.1 audio plus lossless Dolby TrueHD with Atmos and DTS:X. Both devices need eARC to get those extra formats.
Should I plug my streaming device into the TV or the soundbar?
Plug it into the TV in most cases, and let ARC or eARC send the sound to the soundbar. That keeps the newest video features, like 4K at 120Hz, on the TV’s own inputs. Some soundbars have HDMI inputs that pass video through, which is useful when the TV has few HDMI ports.
Related Guides
- Best Soundbar Deals for Black Friday 2026: Bose, Sonos, Samsung, and Budget Picks
- Black Friday Home Theater Deals 2026: Soundbar, Subwoofer, and Surround Bundles
- How to Mount a TV on Drywall Safely (Studs, Anchors, and Weight Limits)
- Vizio V-Series 5.1 Soundbar Review: Budget Surround Sound That Still Delivers
- Samsung C400 Soundbar Review: A Simple, Budget TV Sound Upgrade
- Which Is Better, a Smart TV or a Roku TV? Platforms Compared