Best TV Settings for GTA 6 on PS5 and Xbox: Game Mode, HDR, and HGiG

Home Tech Land is reader-supported. When you buy through links on our site, we may earn a commission. As an Amazon Associate, we earn from qualifying purchases.

Last updated: . How we research: We build these guides from manufacturer support documentation and owner reports, and we update them when menus or apps change. Learn more about Home Tech Land.

The best TV settings for GTA 6 are Game Mode (or your TV’s game picture mode), HDR Gaming Interest Group (HGiG) tone mapping, and the console’s own high dynamic range (HDR) calibration, run in that order. Grand Theft Auto VI (GTA 6) launches November 19, 2026, on PlayStation 5 (PS5), PS5 Pro, and Xbox Series X|S at 30 frames per second (fps), so picture accuracy and low input lag matter far more than refresh rate. This guide gives the console steps, then the menu paths for LG, Samsung, TCL, Hisense, and Sony TVs, taken from each brand’s support pages.

Quick verdict: Plug the console into a High-Definition Multimedia Interface (HDMI) 2.1 port, turn on the enhanced HDMI format and Game Mode, switch tone mapping to HGiG, then run Adjust HDR on PS5 or Calibrate HDR for Games on Xbox. If your TV lacks a full-speed port or a good cable, start with an Ultra High Speed HDMI cable on Amazon.

Key takeaways

  • Frame rate: GTA 6 runs at 30fps on every console at launch, and GamesRadar reported that nothing extra was announced for PS5 Pro.
  • Most important setting: HGiG lets the console handle HDR tone mapping once, so highlights keep their detail instead of clipping.
  • Order matters: Set the TV first (HDMI format, Game Mode, HGiG), then run the console’s HDR calibration, so the calibration matches the final TV settings.
  • Console settings: On PS5, set HDR to On When Supported under Settings, Screen and Video, Video Output, then run Adjust HDR.
  • Storage: Rockstar says the pre-load needs up to 212 gigabytes (GB), so clear space before November 19.

Why GTA 6 settings matter more than usual

Rockstar confirmed GTA 6 ships at 30fps on consoles, and Rockstar North’s Rob Nelson said further options may come later, according to GamesRadar. The publication added that nothing was specified for the PS5 Pro and that a separate performance mode likely won’t exist at launch. With the frame rate fixed, the gains come from HDR accuracy, input lag, and getting the HDMI chain right.

Leonida’s sunsets, neon strips, and dark swamps push HDR hard. If the TV and console both try to tone map the image, bright areas blow out and dark areas crush. If you’re still shopping for a screen, our best TV for GTA 6 guide ranks five sets under $1,000.

GTA 6 PS5 settings: set up the console

Every setting below sits under Settings, Screen and Video, Video Output, according to PlayStation’s support page. Do these after you set up the TV, or rerun Adjust HDR at the end.

  1. Set Resolution to Automatic.
  2. Set HDR to On When Supported. Always On converts standard dynamic range (SDR) apps to HDR, which you don’t need.
  3. Set 120 Hz Output, VRR (variable refresh rate), and ALLM (auto low latency mode) to Automatic. They don’t change GTA 6 at 30fps, but they keep other games working correctly.
  4. Open Adjust HDR and follow the three screens, lowering each slider until the symbol barely disappears.

Xbox Series X|S settings

Microsoft’s paths come from Xbox Wire. Press the Xbox button, open Settings, General, TV and Display Options, and check 4K TV details to confirm your TV supports HDR10 and 4K at 120Hz. Then choose Setup, Calibrate HDR for Games, and follow the prompts. Under Advanced, Video Modes, turn on Allow Variable Refresh Rate and Allow Auto Low Latency Mode.

TV settings for gaming: what each one does

  • HDMI enhanced format: Opens the port’s full bandwidth for 4K HDR and gaming features. Brands call it Input Signal Plus, HDMI 2.1 mode, Enhanced Format, or HDMI Signal Format.
  • Game Mode: Cuts input lag by switching off heavy processing. With ALLM, the TV enters it automatically when the console starts.
  • HGiG tone mapping: Tells the TV to stop guessing at HDR brightness, so the console’s calibration holds. Our local dimming explainer covers the backlight side of HDR.
  • Motion smoothing: Keep it off. Game Mode usually disables it, and our motion smoothing guide shows where to find it if your TV leaves it on.

Step by step: GTA 6 HDR settings by TV brand

LG TVs (webOS)

  1. Press the settings button and go to All Settings, General, Game Optimizer, and turn on ALLM there, according to LG’s Game Optimizer page.
  2. Set the picture mode to Game Optimizer. LG says HGIG is unavailable in other picture modes.
  3. On webOS 6.0 (2021) and later, go to All Settings, General, Game Optimizer, Screen, Tone Mapping Compensation, and choose HGIG. On webOS 5.0 (2020) and earlier, the path is All Settings, Video, Video Mode Settings, Advanced Settings, Tone Mapping Compensation, according to LG’s HGIG support page.
  4. Run the console’s HDR calibration.

Samsung TVs (Tizen)

Samsung moves Game Mode almost every year. According to Samsung’s Game Mode support page, the paths are:

  • 2025 models: Settings, All Settings, Advanced Features, Game Mode Settings, Game Mode.
  • 2023 and 2024 models: Settings, All Settings, Connection, Game Mode Settings.
  • 2022 models: Settings, All Settings, Connection, Game Mode Settings, Game Mode.
  • 2017 to 2021 models: Settings, General, External Device Manager, Game Mode Settings, Game Mode.

Samsung doesn’t list a separate 2026 path, so start with the 2025 path on a 2026 TV such as the M80H. Samsung’s UHD gaming guide lists Input Signal Plus under Settings, General, External Device Manager; turn it on for the console’s port. For HGiG, Seeking Tech says to set Game Picture Expert to Game HDR on the 2025 S90F. A 2025 firmware update removed HGiG on some models, and update 1131 restored it as HDR10 Game in the Game Bar’s picture settings, set to Basic, according to choose.tv. Update your TV before you look for it. Turn off Game Motion Plus for GTA 6, since it adds processing.

TCL TVs (Google TV and Roku TV)

  1. Google TV models: Go to Settings, Inputs, select the console’s HDMI port, and set HDMI Mode to HDMI 2.1, according to Seeking Tech’s QM8 guide.
  2. Check Settings, System, Game Master, which holds VRR and ALLM. TCL says it may appear only when a console is detected on an HDMI input, according to TCL’s Google TV settings guide.
  3. Roku TV models: Press Home, go to Settings, Inputs, select the console’s port, and set HDMI mode to Auto, according to Roku’s HDMI setup page. Turn on ALLM on the console so the TV enters Game mode by itself; to set it manually, press the Star button, then Picture settings, Customize Picture, Game mode, according to Roku’s gaming settings page.

TCL doesn’t document an HGiG toggle on its support pages, so lean on the console’s HDR calibration. Our TCL vs. Hisense comparison explains other differences between the two brands’ gaming features.

Hisense TVs (Google TV)

  1. Set the console’s port to Enhanced Format in the HDMI Format setting, according to Seeking Tech’s Hisense U7K guide.
  2. Choose Settings, Display and Sound, Picture, General, Picture Mode, Game, according to iTechGuides.
  3. Under Settings, Display and Sound, Game Settings, turn on Instant Game Response, which enables ALLM, and FreeSync if your model offers it.
  4. Run the console’s HDR calibration. Hisense labels vary by model and year, so check the built-in manual if a name differs.

Sony BRAVIA TVs

  1. Set HDMI Signal Format to Enhanced Format for the console’s port, which Sony’s BRAVIA gaming guide says 4K at 120Hz requires.
  2. Let ALLM switch the TV into Game Mode, and use Quick Settings to adjust brightness.
  3. For HDR, Sony lists Settings, Picture Settings, HDR Tone Mapping. What Hi-Fi recommends turning it off, running the PS5’s Adjust HDR, then setting it to Gradation Preferred; on the A95L it sits in the Picture menu’s Brightness section.

Newer BRAVIA TVs also offer Auto HDR Tone Mapping with a PS5, which Tom’s Guide’s BRAVIA 7 II review says lets you skip the manual HDR step. What Hi-Fi found the automatic setup on 2023 models too bright, so run the manual calibration if highlights look harsh.

Troubleshooting tips

  • No HDR badge: Move the console to an HDMI 2.1 port and confirm the enhanced format is on for that port.
  • Flicker or blank screen: Try a certified Ultra High Speed HDMI cable. On PS5, Video Transfer Rate settings of -1 or -2 can also reduce 4K flicker, according to PlayStation.
  • Too dark with HGiG: Raise the TV’s brightness in Game Mode, or try dynamic tone mapping and compare.
  • Old TV without HDMI 2.1: GTA 6 at 30fps still looks great over HDMI 2.0. If you want an upgrade, see our best 65-inch TV under $1,000 picks.
  • Storage: The pre-load opened November 10 and needs up to 212GB, according to GamesRadar.

Compare similar gaming TVs on Amazon

Amazon is our main affiliate partner, and it carries current gaming TVs from TCL, Hisense, LG, Samsung, and Sony, plus the cables to connect them.

TVDisplay typeNative refresh rateHDMI 2.1 portsHGiG supportBest forShop
TCL QM7L (2026)Super Quantum Dot Mini light-emitting diode (Mini LED)144Hz4 (2 at 144Hz)Not documented by TCLBright rooms on a budgetCheck price
Hisense U7SG (2026)Mini LED165Hz4Not documented by HisenseGaming featuresCheck price
LG B6 OLED (2026)Organic light-emitting diode (OLED)120Hz4Yes (HGIG)Dark roomsCheck price
Samsung M80H (2026)Mini LED (no quantum dots)144Hz3Game HDR on recent modelsSamsung householdsCheck price
Sony BRAVIA 7 II (2026)True red, green, and blue (RGB) Mini LED120Hz2HDR Tone Mapping offPS5 ownersCheck price

Specs come from Tom’s Guide, SamMobile, and manufacturer listings, summarized in our GTA 6 TV guide and Tom’s Guide’s BRAVIA 7 II review. For more value picks, see the best smart TV for the money. Prices change often.

Frequently asked questions

What are the best HDR settings for GTA 6 on PS5?

The best HDR settings for GTA 6 on PS5 are HDR set to On When Supported, the TV’s HGiG mode turned on, and the console’s Adjust HDR calibration run afterward. That combination lets the PS5 and the game handle tone mapping once, so bright skies and neon signs keep their detail instead of clipping to flat white.

Should I use HGiG or dynamic tone mapping for GTA 6?

HGiG is the better choice for GTA 6 if you want accurate highlights, while dynamic tone mapping gives a brighter, punchier image. LG notes the picture can look darker with HGIG on, so if the game looks too dim in a bright room, switching tone mapping back on is a reasonable personal choice.

Does GTA 6 need 120Hz or VRR?

No, GTA 6 doesn’t need 120Hz or variable refresh rate (VRR) at launch, because it runs at 30 frames per second (fps) on PS5, PS5 Pro, and Xbox Series X|S. Leave 120Hz and VRR on Automatic anyway, since they cost nothing and help if Rockstar adds a higher frame rate option later.

Why does GTA 6 look washed out on my TV?

GTA 6 usually looks washed out when the TV’s HDMI port isn’t in its enhanced or HDMI 2.1 mode, or when the console sends HDR to a TV that isn’t in its HDR game mode. Turn on the enhanced HDMI format for the console’s port, confirm the TV shows an HDR badge, and rerun the console’s HDR calibration.

Final verdict

The best TV settings for GTA 6 come down to four steps: enhanced HDMI on the console’s port, Game Mode, HGiG tone mapping, and the console’s HDR calibration last. Since GTA 6 runs at 30fps, those steps do more for the picture than any refresh rate setting. If your TV can’t do HDR well, browse 4K gaming TVs on Amazon or pick up an Ultra High Speed HDMI cable before November 19.

Leave a Comment